bricodepot CSB60 Manual Del Usuario página 4

Danger of burns! During use the appliance becomes hot. Care
should be taken to avoid touching heating elements inside
the oven.
Do not lean on the door or place any objects on the door of the
appliance. This can damage the door hinges.
The oven must be installed in accordance with installation
instructions and all dimensions must be followed.
Before connecting the appliance to the power supply, check that
the power supply voltage and current rating corresponds with the
power supply details shown on the appliance rating label.
Never use a damaged appliance! Disconnect the appliance from
the electrical outlet and contact your retailer if it is damaged.
Danger of electric shock! Do not attempt to repair the appliance
yourself. In case of malfunction, repairs are to be conducted by
qualifi ed personnel only.
To avoid damaging the cord, do not squeeze, bend or chafe it on
sharp edges. Keep it away from hot surfaces and open fl ames.
Lay out the cord in such a way that no unintentional pulling or
tripping over it is possible. Keep the appliance and its cord out of
reach of children.
Do not operate the appliance with wet hands or while standing on
a wet fl oor.
Always turn the appliance off before disconnecting it from the
power supply.
Disconnect the oven from the power supply when not in use and
before cleaning.
WARNING: This appliance is supplied with a three core supply
cord and must be connected direct to the mains electricity supply
via a omni-polar or double pole switch having a 3mm minimum
contact gap on each connector.
The fused spur should be installed in an easily reachable place so
that in case of emergency the appliance can be disconnected from
power immediately.
The fi xed wiring must be protected against heat surfaces.