Pusat K3 Pro Manual De Usuario página 3

EN
4. Adjustable lighting effect speed: Press and hold the [FN] key, and then
press the + key "+" to increase the speed of the lighting effect. Press and hold the [FN]
key, and then press the - key "-" to decrease the speed of the lighting effect. There are 6
levels of adjustment.
5. There are 18 backlighting effects:
<1>FN + INS = A. Trial B. Briefing C. Static
<2>FN + Home = A. Ripple Graff B. Pass without Trace C. Coastal
<3>FN + PGUP= A. Hurricane B. Accumulate C. Digital Times
<4>FN + DEL= A. Go with Stream B. Clouds Fly C. Winding Paths
<5>FN + END = A. Flower blooming B. Snow Winter Jasmine C. Swift action
<6>FN + PGDN = A. Both ways B. Surmount C. Fast and Furious
6. Adjustable side LED lighting effect mode: Press and hold the [FN] key, and then press
the PAUSE key "PAUSE" to change the effect mode. There are Wave, spectrum, breathing,
constant light and off mode (LED light can be customized, and the LED light on the board
and side LED could be synchronized).
7. Adjustable side LED lighting speed mode: Press and hold the [FN] key, and then press
the SCRLK key "SCRLK" to change the speed. There are 5 different level of the adjustment.
8. To disable the [WIN] key: Press and hold the [FN] key, and then press left [WIN] key to
turn off [WIN] key in order to avoid leaving gaming function if user presses [WIN] key by
mistake. Repeat the above operation to restore the function.
9. [Volume Scroller Key Control] Press to switch between Brightness and Volume adjust
modes.
Light On – To adjust the brightness of the keyboard backlit.
Light Off – To adjust the Volume of the system.
10. [Macro Keys, G1 ~ G5] G1 ~ G5 default set as F1 ~ F5. When the "G" key has macro con-
tent, the button light will be on; when there is no content the light will be off and perform
as the default button function F1~F5.
11. [Macro Record Function "REC"] Press the "REC" button to be solid light to start the
recording function, the NUM, CAP, SCR, WIN indicators will flash slowly, then select G1 ~ G5
to flash rapidly to be the corresponding button to be stored. Press the valid button to start
recording, the maximum will be 64 normal buttons or within 30s. The recording will be
automatically exit and save or press the REC button after the recording is completed.
12. [Erase Macro Function] Press the "FN" + "REC" and hold for 5 seconds to erase all the
Macro settings. Erase specific Macro key: Press the "REC" button to be solid light to start
the recording function, the NUM, CAP, SCR, WIN indicators will flash slowly, then select G1 ~
G5 to flash rapidly to be the corresponding button to be erased. Press "REC" key button to
complete the erase process. After the Macro has been erased, it will go back to default
setting as F1 ~ F5.
04