Chaumet SELF-WINDING MECHANICAL WATCH WITH LARGE DATE Manual De Instrucciones página 2

SELF-WINDING MECHANICAL
WATCH WITH LARGE DATE
HOUR-MINUTE-SECOND-LARGE DATE
FUNCTIONS
Your watch has a self-winding mechanical
movement. Each movement of your wrist moves an
oscillating weight that winds the spring to keep your
watch going. When fully wound and not worn, your
watch's power reserve is almost 42 hours. If not
worn, its power reserve runs down and it will stop.
Position 1: normal position and manual
1 2 3
movement winding
In this position, with the crown pushed fully against
the case, you can wind your watch manually by
rapidly rotating the crown clockwise.
Position 2: adjusting the date
To adjust the large date, pull the crown one notch
into position 2 and turn it anti-clockwise until the
two numbers of the desired date appear.
Do not adjust the date between 8.00 pm and
4.00 am, otherwise you risk damaging the
mechanism.
Position 3: setting the time
To set the correct time, pull the crown out
two notches to position 3 (maximum) and turn the
hands clockwise to the desired setting.
After use, make sure you always push the crown back against the case to position 1.