Installation Instructions - Dunsby DYEVT2035 Guia De Inicio Rapido

A
B
A
D
C
Contact Belle Forêt at (800) 880-8164. Copyright ©2015, World Imports Decorative Plumbing. All rights reserved.
1.
If the oor is uneven, causing the vanity (A) to wobble, determine which
foot needs to be adjusted in height.
2. Carefully tilt the vanity (A) either backwards or forwards to access the leg
leveler. Turn the leveler clockwise to make the leg shorter, or
counterclockwise to make it longer.
3. Repeat as needed with the other feet until the vanity stands solidly on the
oor.
CAUTION
Two people are needed to safely tilt the vanity and access the leg levelers.
1.
Wipe o the top edges of the vanity (A) that will be in contact with the sink
(B) using a clean rag.
2.
Apply a layer of silicone along the edge.
1.
Align the sink (B) with the cut-out on the vanity top (A).
2.
Slowly lower the sink (B) onto the vanity (A).
3.
Wipe away any excess silicone that may have seeped out.
1.
Insert four shelf pins (D) into the four pre-drilled holes at the desired height
inside the vanity (A) compartment.
2.
Slide the shelf (C) into the compartment above the pins.
A
PAGE 3
DUNSBY VANITY COMBO

INSTALLATION INSTRUCTIONS

hts reserved.