9.3 Mode setting
9.3.1 Super cooling - Super freeze - Vacation mode
· Press MODE button, fridge mode will cycle in the following order, corresponding icon will illuminate:
Vacation -> Super FRZ. Super Cool + Super FRZ. -> Super Cool -> None -> Vacation
· Running status of each mode
1) Quick cooling mode
The "Super Cool" icon will illuminate, the refrigerating chamber will automatically run at 2 for 2.5 hours and then
exit. After exiting, the refrigerating chamber will return to the previous set temperature.
2) Quick freeze mode
The "Super FRZ." icon will illuminate, the freezing chamber will automatically run at 24 to setting off time and then
exit. After exiting, the freezing chamber will return to the previous set temperature.
3) VACATION MODE
The icon will illuminate, the refrigerating chamber cooling is off and no temperature display, "OFF" icon will
illuminate. The freezing chamber will automatically run at -18ºC.
Press the "FRZ.TEMP." or "REF.TEMP." button once to exit this mode, and the refrigeration and freezer will return to the
previous set temperature.
· Setting of super freezing time
1) The default setting is 26 hours
2) After setting "SUPER FRZ." mode, long press the "FRZ.TEMP" button for 3 seconds, the display will shows "48",
which means that time of super freezing has been set at 48 hours. And press "FRZ.TEMP" button again, the display
will shows "26", which means that time of super freezing has been set at 26 hours.
9.3.2 Locking and unlocking
In unlocking state, keep pressing the lock button for 3 seconds to lock, and the locking beeping will be rang.
In locking state, keep pressing the lock button for 3 seconds to unlock, and the unlocking beeping will be rang.
The refrigerator enters into locking state automatically 30 seconds after no button operation.
Except for the door open alarm and failure alarm can be carried out in the locking state, others button
operations shall be conducted in unlocking state.
9.4 Setting of ice maker and filter (None)
9.5 Defrosting function
· Defrosting theory:
The defrosting of evaporator is realized by the heating of heater, following the temperature rise, the frost on
evaporator becomes water, and the water flow into the evaporating pan via the draining system, the water in
evaporating pan evaporate away finally
· Defrosting steps:
Compressor shutdown fan motor is turned off after 3~10 minutes (for different model refrigerator, the time is
electric damper closed the heater start working the heater stop when the temperature rise to setting after 7
minutes, if the start up condition is reached, the compressor will start the electric damper resets once after 3
minutes, the fan motor will start work
· Meet one of the following conditions , defrost heating exit:
1) When the frozen defrosting sensor has no fault, the measured temperature Tfd ≥≥ the set temperature which
defrost heating exit
2) When the frozen defrosting sensor has no fault, the defrosting time is ≥≥ 60 minutes
3) When the frozen defrosting sensor is faulty , the heater will stop after work 20 minutes
102