OLSON OLFC186X Manual Del Usuario página 33

7. Place the freezing door on the lower hinge and install the center hinge, hole caps, center beam screw and
screw cap.
8. Remove the upper left hinge cover and upper left hinge from the accesory bag.
Place the refrigerator top signal line 4 to the door body signal line 1, and connect the signal line 2 to the signal
line 3. Finally, replace the hinge decorative cover to the right side of the box body (note: when replacing the hinge
decorative cover to the right side of the box body, the two inserts on the hinge decorative cover (as shown in the
figure) shall be cut off)
(The picture above is only for reference. The actual configuration will depend on the physical product or
statement by the distributor)
33