Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
Model#: 21088-001(SKU#:1003075264)
Model#: D21088-001(SKU#:1003075301)
3 LIGHT CAGED CRYSTAL VANITY
IMPORTANT SAFETY INSTRUCTIONS
Read and Save:
1. To reduce the chance of fire or electrical shock: Do not install non-factory wiring or any other electrical components.
Altering or modifying the lamp in any way will render the lamp unsafe.
2. Keep curtains, shades, wall hangings and all other fabrics and objects away from the lamp canopy, lamp shade and light
bulb. Unit is not designed to support additional weight. Do not hang objects from the lamp or any lamp part.
3. Before starting the installation, disconnect the power by turning off the circuit breaker or removing the appropriate fuse
at the fuse box. Turning off the power at the light switch is not sufficient to prevent electrical shock.
4. This unit is suitable for installation in a damp, indoor location only.
5. Electrical Connections: All electrical connections must be in accordance with local codes, ordinances and the National
Electric Code. If you are unfamiliar with methods of installing electrical wiring, secure the services of a qualified,
licensed, electrician.
6. This unit is to be mounted to a metal electrical junction box (outlet box) directly supported by the building structure.
7. Tools and Materials Required: (Not Included) Flathead screwdriver, wire cutters, ladder, pliers,
U.L./CSA listed electrical tape.
LIGHT BULB REPLACEMENT
1. Use three 60 Watt Maximum, Type A bulb or CFL equivalent or LED equivalent (bulb not included).
2. DO NOT EXCEED RECOMMENDED WATTAGE.
3. Turn off the unit and allow the bulb to cool before touching.
4. Light bulb should never touch the lamp shade.
CLEANING AND MAINTENANCE
1. Clean using a mild cleaning solution and a soft cloth.
2. Never use a rough cloth or chemical cleaners containing acids, abrasives or solvents.
1
r
Tabla de contenido
Manuales relacionados para ALSY Lighting 21088-001
Resumen de contenidos para ALSY Lighting 21088-001
- Página 1 Model#: 21088-001(SKU#:1003075264) Model#: D21088-001(SKU#:1003075301) 3 LIGHT CAGED CRYSTAL VANITY IMPORTANT SAFETY INSTRUCTIONS Read and Save: 1. To reduce the chance of fire or electrical shock: Do not install non-factory wiring or any other electrical components. Altering or modifying the lamp in any way will render the lamp unsafe.
-
Página 2: Installing The Mounting Plate
Installation Making the electrical connections Installing the mounting plate Carefully unpack and lay all parts on a clean, level surface. Unscrew the canopy nuts (C) from the fixture assembly (B) NOTE: Make the connections to a 120V AC 60Hz circuit. and detach the mounting plate (A). -
Página 3: Aplique Enrejado De Cristal Con 3 Luces Para El Tocador
Modelo #: 21088-001(SKU#:1003075264) Modelo #: D21088-001(SKU#:1003075301) APLIQUE ENREJADO DE CRISTAL CON 3 LUCES PARA EL TOCADOR INSTRUCCIONES IMPORTANTES DE SEGURIDAD Leer y conservar: 1. Para reducir las posibilidades de incendio o descarga eléctrica: No instale cableado eléctrico u otros componentes eléctricos que no vengan de fábrica con esta lámpara. -
Página 4: Instalación
Instalación Instalación de la plaque de Conexiones eléctricas montaje Desembale con cuidado todas las piezas y colóquelas Haga las conexiones a un circuito de NOTA: 120V AC 60Hz. sobre una superficie limpia y plana. Destornille las tuercas de la cubierta (C) y sepárelas de Conecte los hilos blancos de la luminaria al hilo blanco la cubierta (B) para separarel plaque... -
Página 5: Garantía Limitada
Consumer Service Service d’aide aux Consommateurs Servicio al Consumidor http://www.evolutionlightingllc.com LIMITED WARRANTY EVOLUTION LIGHTING warrants all of its lighting fixtures against defects in materials and workmanship for one (1) year from the date of original purchase. Electronic parts including passive infrared devices, photoelectric switching mechanisms, and light bulbs provided with Evolution Lighting products are warranted for 30 days from the date of original purchase.