Idiomas disponibles
Idiomas disponibles
BIDET TOILET SEAT ELONGATED
Note: Please remove the regulator cover and regulator o-ring under the following conditions:
A. When the water dynamic pressure is lower than 7.25 PSI, especially using the family tank.
B. When the nozzle cannot work normally and water is low.
1. Take out the regulator with appropriate tools.
2. Remove the regulator cover and regulator o-ring except the sealing o-ring.
3. Insert the regulator component into the inlet pipe.
Caution: You must use the regulator cover and regulator o-ring when the water pressure is higher than 14.5 PSI.
Regulator cover
1
Regulator
Washer
Filter
Sealing O-ring
2
Regulator O-ring
3
4
