DISTRIBUCIONES LUMÍNICAS DISPONIBLES TIPO I * Usos Tipo I * TIPO I: Vialidades es calles secundarias, corredores viales, callejones, ciclovías, Vialidades primarias con camellón TIPO II * Usos Tipo II * TIPO II: Vialidades en fraccionamientos, vías secundarias, primarias, colectoras, estacion- amientos, accesos industriales.
INSTALACIÓN 1. Pass the input cable through the installation 2. Pass the input cable through the 3. Adjust to the right elevation. Tighten up tube, and tighten up the two M10x30 hex rubber gland. the two M10×25 hex socket screws to socket screws on it fixate the luminary.
Página 4
DIMENSIONES MODELO ANCHO LARGO GROSOR PESO T12A-1 630 mm 330 mm 150 mm 6.1 Kg T12A-2 755 mm 330 mm 150 mm 7.9 Kg T12A-3 880 mm 470 mm 155 mm 13.1 Kg PAQUETE 7.8 Kg T12A-1 745 mm 430 mm 210 mm 9.6 Kg T12A-2...
Página 5
CONEXIÓN DE CONECTORES IMPERMEABLES IP68 Conecte los cables de los accesorios a los cables de suministro de voltaje apropiados, utilizando conector macho conectores del tamaño adecuado: 1) Conecte el cable tierra del lado suministro al cable verde del accesorio, el cable neutro del lado suministro al cable blanco del accesorio y el cable conector hembra vivo del lado suministro al cable negro del...
AÑOS GARANTÍA: >60000 HRS. VIDA ÚTIL DEL SISTEMA: IP68 GRADO DE PROTECCIÓN EN SISTEMA ÓPTICO: IK10 GRADO ANTIVANDÁLICO EN SISTEMA ÓPTICO: IP66 GRADO DE PROTECCIÓN EN SISTEMA COMPLETO: IK09 EN CARCASA GRADO ANTIVANDÁLICO EN SISTEMA COMPLETO: SUPRESOR DE PICOS (SPD): KV, INTEGRADO CORTO CIRCUITO PROTECCIONES DE DRIVER:...