Idiomas disponibles
Idiomas disponibles
STEP 7
Press and hold the LARGE ROUND GREY button for
3 seconds on the front of the pendant. See Fig. 7
You will hear the pendant say, "Your emer-
gency call is now being dialed, please stand
by." It will say this multiple times. The green
light on the pendant will illuminate indicating
that it has been activated and will remain illumi-
nated during the entire conversation with the
emergency operator. See Fig. 7A
STEP 8
You will then hear a dial tone, followed by a dialing sequence. This is an indication
that your pendant is attempting to call the monitoring center.
When dialing sequence is completed, your pendant will again say, "Your emer-
gency call is now being dialed, please stand by."
Soon after, there will be a brief period of silence. This means that your pendant is
talking to the monitoring center, and establishing communication.
STEP 9
Wait a few moments to hear the operator's voice through the pendant identifying
themselves and asking you if everything is OK.
STEP 10
Identify yourself with the operator and tell him/her that you are simply testing your
system. Follow the operator's instructions to complete the test.
YOUR MediPendant™ SYSTEM IS NOW ACTIVATED AND READY FOR USE.
See OWNER'S MANUAL for further instructions.
Rev. QSG01
08/09
All manuals and user guides at all-guides.com
Manufactured by
5215-C Militia Hill Road, Plymouth Meeting, PA 19462
www.MedicalAlarmConcepts.com
Fig. 7
Fig. 7A
TM
4
