Using Your Blanket - Bielay warmness Manual De Instrucciones

Using Your Blanket

Once the Blanket has been fitted to the bed correctly and the power
source has been connected, plug the power lead into the closest
socket at the pillow end, using an extension lead if needed to ensure
that the lead is not stretched.
The Blanket is designed to preheat your bed to the desired
temperature using the temperature control switch. The
controls vary depending on your model.
Switch Control
The Blanket has 3 heat manual setting.
Setting the heat
The numbers on the control panel represent the following heat
levels
0 = Off Position.
1 = Low Heat Position.
2 = Medium Heat Level.
3 = High Heat Level.
10