Vinylexpress Q Serie Guía De Usuario página 240

1
Click on the "Cut Contour" icon.
2
The "Cut Contour" screen is displayed.
Set the ROTATE to
the media. Always load the media so that the protrait
orientation on the cutter matches that of the printer.
Press "Send".
3 The confirmation screen is displayed.
Using the cutting plotter's POSITION (
(within the red rectangle).
Press "OK" on the LXi confirmation screen. Registration
marks are scanned. Cutting starts automatically once all four
registration marks are detected.
to match the setting direction of
) key, move the tool to the lower right registration mark
13-7
Supplement
The ROTATE can be set only when using
4POINTS.
For other registration marks, load the media
according to the orientation of the preview.
Supplement
When the "Cut Contour" screen is displayed
for the first time, the "Add Device" screen is
displayed. Follow the instructions on the screen
to select the model name to use.
•
For USB connection, select the "VinylExpress_
USB".
•
For network connection, select the "TCP/IP"
and then enter the IP address of the cutting
plotter.
Supplement
If a registration mark scanning error occurs,
check the registration marks etc. (See "ARMS".)