Safety Instructions - Sigete SG-5078 Manual Del Usuario

ENGLISH
4
!

SAFETY INSTRUCTIONS

Please read through the following safety
precautions carefully before switching on the
steam iron. Keep this instruction manual in a
safe place for future reference. Failure to
follow all the instructions listed may result in
electric shock, fire or serious personal injury.
•
Before using the iron for the first time,
check that the voltage and power
supply comply with the specifications
indicated on the rating plate of the
appliance.
•
The iron is not intended for use for by
persons (including children) with reduced
physical, sensory or mental capabilities,
or lack of experience and knowledge
unless they have been given supervision
or instruction concerning use of the
appliance by a person responsible for
their safety.
•
This appliance can be used by children
aged from 8 years and above and
persons with reduced physical, sensory or
mental capabilities or lack of experience
and knowledge if they have been given
supervision or instruction concerning use
of the appliance in a safe way and
understand the hazards involved.
•
Always keep the iron out of the reach of
children. Close adult supervision is
necessary when the iron is used by or
near children.
•
Burns can occur from touching hot metal
parts, hot water or steam. The iron will be
of high temperature when used; never
touch it with your hand or close to the
flammable product in order to avoid
accidents.
•
The ejected steam is hot and therefore
hazardous. Never direct the steam
towards people.
•
Unplug the iron from the mains electrical
supply:
•
before cleaning;
•
before filling with water or
emptying the Water Tank [10];
•
immediately after use;
•
while it is being repaired.
•
Do not relocate or store the iron while it is
operating or while it is connected to the
mains electrical supply.
•
The iron base must not be submerged in
water, as any contact with water will
cause a malfunction and/or an electric
shock. Do not use the appliance with wet
hands.
•
To prevent the risk of electrical shock,
never immerse the power cord, plug or
any non-removable parts of this iron in
water or any other liquid.
•
The iron is not to be used if it has been
dropped, if there are visible signs of
damage or if it is leaking.
•
Do not operate the iron if the plug or
power cord have been damaged or if it
is not working properly.
•
Never use the iron if it is damaged in any
way.
•
Check the power cord regularly for
damage. If the power cord is damaged
in any way, it must be replaced by the
manufacturer or its service agent or a
similarly qualified person in order to avoid
an electrical hazard.
•
All repairs should be done by any of our
special repair agents. Improper repairs
may place the user at risk.
•
Deposits or minerals in the Water Tank will
generate scales which may block the
steam holes in the Soleplate. Use of
distilled water is therefore recommended.
•
Do not use chemically descaled water.
•
Use an earthed wall socket; the power
cord and plug must be dry.
•
Unfold the AC cord completely before
using it.
•
In order to prevent overriding the circuit
load, please don't use other appliances
with high power at the same time.
•
If it is necessary to connect with several
appliances with high power at the same
time, please use the cord with 10A,
otherwise, the cord with less than 10A will
be too heated.
•
To unplug the iron, grasp the plug firmly
and remove it from the mains electrical
supply. DO NOT PULL ON THE CORD.
•
Do not leave the iron unattended when
in use or when connected to the mains
electrical supply.