Tabla de contenido
Idiomas disponibles
Idiomas disponibles
16. Danger: You should not repair the appliance by yourself. It must be done just by qualified
specialists. Only original spare parts may be used for repair.
17. To unplug before to touch the sockets.
18. Wipe with a dry cloth moistened with soap and water. Dry thoroughly. Unplug the power
before cleaning. Do not allow water inside.
ASSEMBLY
Securely attach the mounting bracket to a wall or ceiling using the correct orientation as
pictured. Only mount the fan to a surface that can support its weight.
Note: The included heavy-duty screws are intended to mount the inline controller
component only. Do not attempt to mount the main unit with these screws. Only use
hardware appropriate for the chosen mounting surface.
Slide the bolt located at the top of the yoke through the appropriate holes in the mounting
bracket for the desired mounting orientation.
Place the flat washer over the end of the bolt. Then thread the nut onto the bolt and tighten
firmly.
OPERATION
Plug the power cord into a 230V power source.
Adjust the position of the yoke and tilt the fan head to direct the breeze where needed.
Select the desired fan speed setting or turn the unit OFF using the rotary dial on the inline
controller.
- L = Low
- M = Medium
- H = High
- OFF
Tabla de contenido
