Stone & Leigh 536-3-68 Serie Instrucciones De Montaje página 6

Figure 6.
Attaching the Conversion Kit
Low Position
Figure 7.
Todder Conversion Kit
Figure 9.
Step 1:
Before attaching the Toddler Conversion

Kit to your Crib the Mattress Platform
must be placed in the lowest position. See
Figure 6. Refer to page 12 in your Crib
Instruction Booklet. Do not reattach the
Footboard.
Loosen the (4) 3/4" connector bolt on Mat-

tress Platform this time. Do not fully re-
move or pull out from the insert of mattress
platform.
Position the Conversion Kit by aligning the

locator hole to metal locator pin. See Fig-
ure 8.
Align the holes in the Frame Posts with the

holes in the conversion kit. Insert (4) 2"
Connector Bolts with Curve Washer to the
conversion kit connector cut out. Securely
tighten with the provided allen wrench.
See Figure 8.
Figure 9 illustrates how the completed

Toddler Bed should look.
After assembly is completed check all as-

sembly bolts and make sur e each is se-
curely tightened using the provided allen
wrench.
Curve Washer Curve Washer
2" Connector Bolt
6
Figure 8.
Allen Wrench
Metal Locator Pin