Precautions For Use - Believe GB-400-200 Manual De Instrucciones

A detailed diagram of the components is available on the last page.
1. Insert the adaptor's connector into the DC jack input behind the base of the diffuser.
2. Place the diffuser on a flat and stable surface and away from the edge.
3. Remove the diffuser's outer cover and inner cover.
4. Pour mineral water (bottled or tap water) into the water tank up to the maximum level indicated (200 ml).
5. Then add a few drops of essential oils (3-15 drops) or home fragrances to the water tank.
6. Replace the inner cover and the outer cover on the diffuser.
7. Plug the adaptor into the outlet.
You are advised to change the water frequently in the tank and clean the diffuser once or twice a week, particularly if you
want to change the fragrance to be diffused.
1. Turn the appliance off and unplug it.
2. Remove the covers and empty the water in the direction of the arrow, on the opposite side of the air outlet.
3. Clean the diffuser water tank using a soft damp cloth. Do not use corrosive detergents. Carefully rub the ceramic
disc with a cotton q-tip being careful not to scratch it.
Air outlet
Empty the water on the opposite side of the
air outlet. Do not allow water into the air
outlet, this would damage the diffuser.

PRECAUTIONS FOR USE

MAINTENANCE
WORKING