Switching To Standby Mode; Inserting And Removing The Hearing Aids - Miracle-Ear GENIUS 3.0 Manual De Usuario

Switching to standby mode

Via remote control or smartphone app, you can switch
your hearing aids to standby mode. This mutes the
hearing aids. When you leave standby mode, the
previously used volume and hearing program are set.
Note:
●
In standby mode, the hearing aids are not turned off
completely. They draw some power.
Therefore we recommend to use standby mode only
for a short period of time.
●
If you want to leave standby mode, but the remote
control or app is not at hand: Turn your hearing
aids off and on again (via push button or by shortly
placing them in the charger until one or more orange
LEDs light up). In this case, the default volume and
hearing program are set.
12

Inserting and removing the hearing aids

Your hearing aids have been fine-tuned for
your right and left ear. Colored markers
indicate the side:
●
red marker = right ear
●
blue marker = left ear
Inserting a hearing aid:
For Click Sleeves, make sure that the bend of the
X
Click Sleeve is in line with the bend of the
receiver cable.
Correct:
Incorrect:
13