ENG
CE DECLARATION CONFORMITY.
Werku
®
declares that the WK602160 panel lifter
►
is in accordance with the European Directives and
Standards 2006/42/CE, EN ISO 12100:2010 and
EN1494-1:2000+A1:2008.
La Coruña, 01/10/2018
R Yáñez
Werku Tools SA
TECHNICAL CHARACTERISTICS.
Load capacity 75 kg
►
cm
Height range 145-350/400 cm
►
range 0-30º
3 mm diameter steel rope IWS 7x19
►
Net weight 46 kg.
►
SAFETY INSTRUCTIONS.
Read all security warnings and all instructions
►
Failure to follow all warnings and instructions
►
listed below may result in serious injuries
all warnings and all instructions for future reference
Accidents can be avoided in many cases by
►
recognizing a potentially hazardous situation before
it occurs and by observing appropriate safety
procedures
Do not use this panel lifter for other
►
applications than those specified in this manual.
WORK AREA SAFETY.
Keep work area clean and well lit
►
and dark areas invite accidents
this panel lifter in explosive atmospheres, such
as in the presence of flammable liquids, gases
or dusts
Keep away from children and curious
►
while operating a this panel lifter
cause you to lose control.
PERSONAL SAFETY.
Stay alert, watch what you are doing and use
►
common sense when operating this panel lifter
Do not use this panel lifter while tired or under
►
the influence of drugs, alcohol or medicines
moment of inattention while operating this panel
lifter power may cause serious personal damage.
USE PPE'S.
Use protection glasses according to EN166
►
Use protection helmet according to EN397
►
protection gloves according to EN388 (minimal
levels 2)
Use protection shoes according to EN
►
ISO 20345:2011 (minimal level SB)
the type of work, use other precise PPE.
Panel size capacity 488x122
►
Graduation
►
►
Cluttered
►
Do not handle
►
Distractions can
►
If required by
►
DO NOT WORK ON TIPTOES.
Keep your feet on the ground and balance at all
►
times
This enables better control of the panels in
►
unexpected situations.
DRESS PROPERLY.
Do not wear loose clothing or jewelry
►
your hair, clothing and gloves away from moving
parts
Loose clothes, jewelry or long hair can be
►
caught in moving parts.
STORAGE.
Store this panel lifter out of reach of children and
►
do not allow the handling of it to people unfamiliar
with this panel lifter or its instructions
lifter is dangerous in the hands of untrained users.
MAINTENANCE.
Check moving parts for misalignment or binding,
►
there are no broken parts or other conditions that
may affect the operation of this panel lifter
Keep
use of the this panel lifter for applications other
than those intended could result in a dangerous
situation
by a Werku
identical replacement parts
safety of this panel lifter is maintained.
BEFORE STARTING WORK.
Make sure that all the screws in the panel lifter are
►
perfectly tightened
installed accessories are perfectly fitted in place
Make sure that the panel lifter is firmly supported
►
before using
beneath you when using the panel lifter in high
areas
Keep your hands away from all moving
►
parts of the panel lifter
are assembled properly
the cable regularly
visual defect (crushing, pinching, etc.) or if a strand
is broken
Check the condition of the return springs and the
►
A
►
cable and replace if worn
the winch (the load should remain in position if the
brake is released)
GENERAL PRECAUTIONS.
When the panel reaches the right height, stop
►
Use
►
pressing the winch handle to avoid premature wear
of the winch or the cable
when the cable is slack
2
English
Please check the panel lifter serviced
►
official repair service using only
®
This will ensure the
►
Make sure that the possible
►
Check that no one is standing
►
Check that all the parts
►
Check the condition of
►
Replace it if it has the slightest
►
Check the tightness of nuts and bolts
►
Check the operation of
►
Check operation before use.
►
Do not release the brake
►
Release the two brakes
►
Keep
►
This panel
►
The
►