Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Cordless
Faux
Wood
Blind
INSTALLATION INSTRUCTIONS
Step 1. Check Package Contents
Missing part? Call 800-264-1190
Mounting hardware kit includes the following:
Part
a
Mounting Brackets
b
Center Support Bracket
c
13/8" Screws
d
Wall Anchors
e
Hold Down Brackets
f
7/8" Screws (for Hold Down Brackets) 4
g
Valance Clips
h
Valance Return Clips
i
Valance Returns
Note: one extra screw of each noted size is included for convenience
Step 2. Tools required
Screwdriver, tape measure, pencil, drill, drill bits, step ladder.
Note: use #6 plastic anchors for dry wall or plaster mounting.
Drill Bits: for screws, use a 3/32" drill bit - for wall anchors, use 1/4" drill bit.
Step 3. Bracket Location and Installation
Your blind may be installed either inside the window frame or outside
the window frame. A mounting bracket should be placed at each
end of the head rail as illustrated. Note that the screws can be
attached to the side, back or top of the bracket based on your need
or preference. For wider shades that require Center Supports, these
should be spaced evenly between the two outside brackets. Always
position the supports such that there is no interference with the tilter
cords and lift cords (if there is only one center support it must be
positioned off-center).
Mark bracket and screw hole locations with a pencil – pre-drill the
screw holes using a 3/32" drill bit, and then attach the brackets using
the 13/8" screws.
Quantity
2
1 (blinds 281/8" to 40" wide)
2 (blinds 401/8" to 48" wide)
3 (blinds 481/8" to 64" wide)
4 (blinds 641/8" to 72" wide)
4 per bracket
3 per center support
4 per bracket
3 per support
2
2 (blinds up to 32" wide)
3 (blinds 321/8" to 40" wide)
4 (blinds 401/8" to 64" wide)
5 (blinds 641/8" to 72" wide)
4
2
3
Tabla de contenido
