Packaging; Unpacking; Packaging After Use - Jordao Mural Columbus Manual De Instrucciones

Instructions Manual

Packaging

- All equipments are supplied with packaging, to
prevent damage during transport. The packing
consists of a wooden palette, which serves as base,
and by bubble plastic surrounding the appliance, to
protect it from bad weather and possible knocks and
bumps.
- When requested to do so by the client, this
equipment can be packed in wooden crates, thereby
providing a greater degree of protection as well as
the possibility of them being stacked.
- Always respect the packaging instructions.

Unpacking

- Remove the bubble
appliance and, with the help of a palette-handler, lift
and remove the wooden palette.
- Check the appliance for damage and verify the
existence of the EC characteristics label. In case of
doubt or if you suspect some anomaly, do not use
the appliance and contact your supplier.

Packaging after use

- If it is obvious that the appliance will remain unused
during long periods, it should be kept in its original
packaging, in an appropriate place, protected from
bad weather.
- To avoid corrosion and to better conserve the
appliance, after unpacking, you should wash it in
lukewarm water with 5% neutral detergent and
afterwards dry it with a soft cloth. Also clean the
condensing unit using a soft brush and a vacuum
cleaner.
Mural Columbus
plastic surrounding the
EN
22