Mamas & Papas breeze Instrucciones De Montaje página 3

Ocultar thumbs Ver también para breeze:
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 6
UK / AUS
IMPORTANT: READ THESE INSTRUCTIONS CAREFULLY AND
Always place your crib on a stable flat surface.
Do not allow young children to play unsupervised in the vicinity of the crib.
WARNING: This crib should be locked in the fixed position when a child is left unsupervised.
Do not use the crib if any parts are broken, torn or missing.
Do not use the body of the crib without the frame.
When the child is able to sit, kneel or pull itself up, the crib should no longer be used any more for this child.
All assembly fittings for the crib must be tightened properly. Special care should be taken to ensure that no screws are loose, as this could cause a child to trap
parts of the body or clothing (e.g. strings, necklaces, ribbons for babies' dummies, etc.) which would pose a risk of strangulation.
The thickness of the mattress chosen should be such that the internal height (the distance from the upper surface of the mattress to the upper edge of the crib
side) is a minimum of 200mm.
Recommended mattress size: 890mm x 400mm. For safety reasons we recommend that you do not use any mattress other than those supplied by Mamas &
Papas.
Be aware of the risk of open fires and other sources of strong heat, such as electric bar fires, gas fires, etc in the near vicinity of the crib.
Your crib frame may be cleaned using a damp cloth, do no use harsh abrasives or bleach. Please refer to the wash care label for instructions on how to clean the
fabric.
Do not use replacement parts that are not recommended or supplied by Mamas & Papas. Non-approved parts may render the repair or crib unsafe.
RETAIN FOR FUTURE REFERENCE
INSTRUCTIONS FOR SAFE USE
3
loading