Before You Begin; Installing The Battery Pack; Charging The Battery - Getac V200 Guia De Funcionamiento

Before You Begin

For complete information of the product,
refer to the User's Manual (in PDF format)
on your Window's desktop or Driver Disc
(if provided).
You can download the latest manual and
drivers by accessing the Getac web link at
http://www.getac.com  Support 
Download. In case you are unable to down-
load the manual file and/or driver file, contact
your authorized dealer for assistance.
Getting the Computer
Running

Installing the Battery Pack

Install the battery pack if it has not been
installed in your computer.
1. Locate the battery compartment on the
right side of the computer.
2. Slide the door lock toward the left to

unlock ( ). Then slide the door latch
downward to open the door (
3. With the ribbon strip facing outward,
slide the battery pack all the way into
the slot.
4. Close the door. Make sure the door latch
clicks into place. Then, slide the door lock
toward the right.
Connecting to AC Power and
Starting Up
The first time you use your computer, use the
AC adapter.
1. Plug the DC cord of the AC adapter to the
power connector of the computer (
2. Plug the female end of the AC power cord
to the AC adapter and the male end to an
electrical outlet (
3. Pull loose the cover latch (
the clamp (

).
4. Press the power button (
5. The Power Indicator lights green. The
operating system such as Windows should
start.

Charging the Battery

To charge the battery, connect the AC adapter
to the computer and an electrical outlet. The
Battery Charge Indicator (
glows amber to indicate that charging is in
progress. When the battery is fully charged,
the Battery Charge Indicator glows green.
It takes approximately 3 hours to fully charge
the battery when the computer is off, and
approximately 6 hours when the computer is
on.

).

).

) and release
 
). Lift up the cover (
) to start up.
) on the computer
).
1