Tabla de contenido
Idiomas disponibles
Idiomas disponibles
EN
CONNECTION OF VARIOUS PANELS (FOLLOWING)
CONNECTION IN PARALLEL
For this installation, double solar connectors especially made for parallel mounting are necessary.
Never install more than 3 panels in parallel.
Panels must be of the same power.
•
Check that the panels power does not go over the one accepted by your charge
regulator.
Connect the regulator to the battery.
•
Connect all the panels positive cables (red) to the positive double solar
•
connector (red), and all the negative cables (black) to the negative solar
connectors (black).
Connect the panels to the charge regulator.
•
To make the panel/regulator/battery connection, we recommend our ready-to-use
UNICONNECT kit, to optimize your electrical performances and simplify the
mounting process.
In this case, the two 100W solar panels connected in series will give the regulator:
200W, 17,6V and 11,24A.
In an installation in parallel, the panels intensities are added, but the voltage stays the same.
Ex : If a panel is in the shadow and produces only 1A but the
other one produces 5A, the final intensity produced will be 6A.
In an installation using 2 or 3 panels, parallel coupling will
guarantee an optimum production, especially in case of shadow.
ADVANTAGES / DISADVANTAGES
Advantages
Disadvantages
26/49
Series
Easy connection
Loss of power if a panel is totally or
partially in the shadow
No loss of power when a panel is in
Use of specific connectors and more
important cross section cables
www.uniteck.fr
Parallel
Parallel
the shadow
Tabla de contenido
