Step 16
Step
1
D30
W
Groove
å
Insert the DRAWER SIDES (D30 and D31) at an angle into
the slot at each end of the DRAWER BOX FRONT (W).
3
Fasten the DRAWER BACK (D77) to the DRAWER SIDES (D30 and D31). Use four BLACK 1-9/16" FLAT
å
HEAD SCREWS (30S).
NOTE: Be sure the DRAWER BOTTOM (D716) inserts into the groove of the DRAWER BACK (D77).
å
Repeat this step for the remaining drawer.
å
Page 20
The tabs should insert freely
into the slots. Gently tilt the
DRAWER SIDES side to side
until the tabs slip into the slots.
D31
D77
D30
D716
VIEW THE T-LOCK BOX VIDEO
2
U n
s u
r f a
D30
Be sure the DRAWER
BOTTOM inserts into the
DRAWER FRONT groove.
å
Slide the DRAWER BOTTOM (D716) into the grooves in the
DRAWER SIDES (D30 and D31) and DRAWER BOX FRONT (W).
Start each screw a few turns before
completely tightening any of them.
BLACK 1-9/16" FLAT HEAD SCREW
D31
418657
With the palm of
your hand, tap the
DRAWER BOTTOM
down into the groove.
fi n
i s h
e d
c e
D716
D31
W
30S
(8 used in this step)
www.sauder.com/services
