Ugur UOF 1 Guia Del Usuario página 42

C- INSTALLATION OF YOUR COOLER
Electric Connection Rules
The product will start when you insert the plug into the outlet as shown in picture 10.
WARNING!
It is forbidden to insert the plug into multiple socket and to use extension cord. (Picture 11)
There is no separate on-off switch on your product.
Do not contact the cables of your product, which are connected to the mains, to hot surfaces.
The outlet you will use must be grounded. Furthermore, the outlet to be used must have the resistance of
at least 10-16 A and be protected with a suitable fuse. Definitely take assistance from our technical service
or a competent electrician with regards to the fuse that should be present on the mains where the outlet is
connected.
Mains voltage and frequency must be same with the value written on the label inside your product. If your
mains voltage is extremely below or above the value indicated, definitely supply demanded voltage by us-
ing a voltage regulator. You can get assistance from an expert electrician with this regard.
Do not place your product's cord onto passageways. This may cause you to get injured and damage your
cooler. (Picture 12)
EN
PICTURE 10 PICTURE 11
42
PICTURE 12