Bluetooth Pairing - Brigmton BAMP-612-N Manual De Instrucciones

CONTROLS
+ / >>: Under TF card or Bluetooth mode, by a short press goes to
the next track. By long press the volume increase. No function in AUX
mode.
- / <<: Under TF card or Bluetooth mode, by a short press will go to
the previous track. By long press the volume decrease. No function in
AUX mode.
PLAY / PAUSE: under TF card mode, by a short press, you can use
the functions of PLAY / PAUSE. Under Bluetooth mode, short press
can play, pause, answer and end a call and pair with your phone.
press for 2 seconds to reject calls. Press "M" key switch to AUX /TF
card mode.

BLUETOOTH PAIRING

Turn on the device with the power button. the blue LED will flash.
Press the PLAY / PAUSE and blue LED flash to start pairing.(this
operation is not mandatory;)
Follow the instructions on your phone to search for Bluetooth devices.
Once the list appears on the unit name, connect it and confirm. If
necessary enter a password "0000" and confirm the selection. Once
connected, the blue LED slow flash. If the connection is unsuccessful
flashes, the blue LED fast flash, please attempt the connection again.
LED INFORMATION
Blue LED flashing: TF card or AUX mode. Bluetooth Mode.
BLUE LED fixed: AUX mode.
BLUE LED fast flash: Pairing mode.
RED fixed: Battery charging. Once fully charged the LED will turn off
OPERATION
- Insert a micro SD card and start playing music.
- AUX Input: You can connect an external device to play music by
Line in cable.
- Bluetooth: You can play via Bluetooth and answer calls via the
microphone. Supports A2DP/AVRCP.