Appendix C: Supported Dvi Resolutions; Appendix D: Software Upgrade - Nevir NVR-7502-22HDR-NYB Manual De Instrucciones

Appendix C: Supported DVI
Resolutions
When connecting devices to your TV's connectors by
using DVI to HDMI cables (not supplied), you can refer
to the following resolution information.
Index Resolution
1 640x400
2
640x480
3 800x600
4
832x624
5 1024x768
6
1152x864
7 1152x870
8
1280x768
9
1280x768
10 1280x768
11
1280x960
12 1280x1024
13 1360x768
14
1400x1050
15 1400x1050
16
1400x1050
17
1400x900
18 1600x1200
19
1680x1050
20 1920x1080
21 1920x1080
22
1920x1200
23 1920x1200
24
480i-480p
25
576i-576p

Appendix D: Software Upgrade

• Your TV is capable of fi nding and updating new
software upgrades over broadcast channels.
• For broadcast channels search, TV looks the
available channels stored in your settings. So before
software upgrade search, it is advised to auto search
Frequency
and update all available channels.
70Hz
1) Software upgrade search via user interface
60Hz-66Hz-72Hz
• It is possible manually to check if there is a new
-75Hz
software upgrade for your TV set.
56Hz-60Hz-70Hz-
• Simply navigate on your main menu. Choose
72Hz -75Hz
Settings and select Other Settings menu. In Other
Settings menu navigate on to the Software Upgrade
75 Hz
item and press OK button to open Upgrade Options
60Hz-66Hz-70Hz-
menu.
72Hz -75Hz
• In Upgrade Options menu select Scan for upgrade
60Hz-70Hz-75Hz
and press OK button.
75Hz
• If a new upgrade is found, it starts to download
the upgrade. A progress bar indicates the remaining
60 HzA
download progress. When download completes with
60 HzB
success a message is displayed for reboot to activate
75Hz
new software. Press OK to continue with the reboot
operation.
60Hz-75Hz
2) 3.AM search and upgrade mode
60Hz-75Hz
• If Automatic scanning in Upgrade Options menu
60 Hz
is enabled, TV wakes up at 03:00 and searches
60 HzA
broadcast channels for new software upgrade. If new
software is found and downloaded successfully, with
60 HzB
next power up TV opens with new software version.
75Hz
Note on reboot operation: Reboot is the last step
65Hz-75Hz
in software upgrade operation if download of new
software is fi nished successfully. During reboot TV
60 Hz
makes fi nal initializations. In reboot sequence panel
60 Hz
power is closed and front led indicates the activity with
60 HzA
blinking. Around 5 minutes later TV restarts with new
software activated.
60 HzB
• If your TV fails to restart in 10 minutes, unplug power
60HzA
for 10 minutes and re-plug again. TV should open with
60Hz
new software safely. If you still can not get TV working,
please kindly repeat unplug and plug sequence a few
60Hz
times more. If your set still can not operate, please call
50Hz
the service personnel to fi x the problem for you.
Caution: While led is blinking during reboot do
not unplug your TV's power. Doing this may cause
your TV not to re-open again and can only be fi xed
by service personnel.
English - 77 -