Biamp Vocia VA-8600 Manual Del Operacion página 4

System Indicators
The LED indicators on the front panel provide information about the function and operational status of the
VA-8600 and VA-8600c chassis and any installed AM-600 or AM-600c amplifier modules. Columns one
through eight correspond to the eight amplifier module slots. The remaining LEDs correspond to the VA-
8600 and VA-8600c chassis.
Amplifier Chassis Indicators
These indicators relate to the entire amplifier unit (chassis).
Power
AC power is a green LED indicator. This will illuminate when a Mains supply is applied to the unit.
Amp Fault
An amber LED illuminates when a chassis fault has occurred.

Flashing Amber LED - Warning -the amplifier chassis or an AM-600 module is not operating
within normal limits. If the condition causing the warning is not corrected, chassis failure may
occur.

Solid Amber LED – Fault - the amplifier chassis or AM-600 has failed - audio may have stopped.
Activity
Activity indicates the configuration status of the Amplifier.

LED off - the unit is not active.

Green LED - the unit is configured and passing audio.

Amber LED - the unit is configured as a redundant device in a failover configuration.

Red LED - Configuration load failure.
Status
Status indicates the health of the amplifier hardware.

Green LED - indicates that the unit powered up normally.

Amber Flashing LED - shown briefly during the power-up self test.

Red LED - the unit experienced a problem during the power-on self test.
Amp Channel Indicators
These indicators relate to each amplifier channel.
VA-8600 Front