Install The Transmitter Batteries; Charging Procedure For Nimh Rechargeable Batteries; Adjusting The Steering Wheel Position - Carson Reflex Wheel PRO 3 Manual De Instrucciones

INSTALL THE TRANSMITTER BATTERIES

Insert new batteries if the LED display flashes or the buzzer
sounds.
1. Remove the transmitter battery cover.
2. Insert new AA Mignon batteries / rechargeable batteries. Pay
attention to the correct polarity.
CHARGING PROCEDURE FOR NIMH RECHARGEABLE BATTERIES IN THE
TRANSMITTER
The optionally available rechargeable batteries 500609042 (NiMh)
can both be charged via the charging socket on the transmitter.
These batteries can be charged with a normal 4-cell NiMh charger
(e.g. 500606073).

ADJUSTING THE STEERING WHEEL POSITION

The steering wheel can be set to any desired position. To adjust it,
the two securing screws must be removed. The steering unit can
then be moved forwards or backwards to the desired position.
Finally re-insert and tighten the two securing screws.
ATTENTION!!!
Tighten the securing screws carefully and do not over-tighten.
4 Batteries
Removable battery
compartment
Option: The removable battery compartment provides the added
option of charging the NiMh batteries without a charging socket.
You will require a separate charger for this.
Please observe the instructions for the chrger and the rechar-
geable batteries!!!
Securing screws
23 // GB