General Safety - BAUKER ID600E3 9 Manual De Instrucciones

General safety

rules for use electric tools
WARNING! Read and understand carefully these instructions. Failure to follow
all instructions listed below may result in electric shock, fire and/or serious
injury. Save these instructions for further references. The term 'power tool' in all of the
warnings listed below refers to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
This device is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the machine by a
person responsible for their safety.
A) Keep work area clean and well lit. Cluttered dark areas invite accidents
B) Do not operate power tools in explosive atmospheres, such as in the presence of
flammable liquids, gases and dust. Power tools create sparks, which may ignite the dust
of fumes.
C) Keep children and bystanders away while operating a power tool. Distractions can
cause you to lose control
33
Work area
A)Power tool plugs must match the outlet. Never modify the plug in any way. Do not use
any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching
outlets will reduce risk of electric shock.
B) Avoid body contact with earthed or grounded surfaces such a pipes, radiators, ranges
and refrigerators. There is an increased risk of electric shock if your body is earthed or
grounded.
C) Do not expose power tools to rain or wet conditions. Water entering in a power tool will
increase the risk of electric shock.
D) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power
tool. Keep cord away from heat, oil, sharp edges of moving parts. Damaged or entangled
cords increase the risk of electric shock.
E) When operating a power tool outdoors, use an extension cord suitable for outdoor use.
Use of a cord suitable for outdoors reduces the risk of electric shock.
IMPORTANT: If the power cord of this tool is damaged, it must be replaced by a
prepared cable, especially available from the authorized service organization.
Do not attempt to operate power tools in poor condition.
General safety rules
for use electric tools
Electrical safety
34