Tabla de contenido
Idiomas disponibles
Idiomas disponibles
WARNING: Disconnect the AC power before any work is done to any part of
the circuit ReVent is connected to. If you do not understand this warning,
seek the services of a qualified licensed electrician.
WARNING: Copper to copper only. Do not use aluminum wire.
WARNING: Follow all local electrical and safety codes, and NEC (National
Electrical Codes).
CAUTION: If your house wires do not match these colors, determine what
each house wire represents before connecting. You may need to consult a
qualified licensed electrician to determine this safely.
6.) Remove the electrical cover set screw and slide open the electrical enclosure.
Disconnect FAN motor from electrical enclosure.
remove
set screw
7.) Connect wiring using the provided WIRE NUTS.
Wire connection for fan and light on separate switches:
line
ground
line
ground
housing
ground
Wire connection for fan and light on one switch:
line
ground
housing
ground
line
neutral
line
neutral
FAN
neutral
light
neutral
line
neutral
FAN
neutral
light
neutral
unplug fan
connectors
line in
light
light
line in
FAN
light
18
slide
line in
FAN
FAN
WIRE NUT
WIRE NUT
Qty:3
Qty:4
Capítulos
Tabla de contenido
