Idiomas disponibles
Idiomas disponibles
III. User Manual
1). Please put suitable cookware onto the plate of induction cooker, and connect the plug to suitable
socket. After connected, the power indicator will light up, indicating that the power is connected
normally.
2). Pressing
, the light of Heating will shine, indicating that the induction cooker is entering the
state of heating. Adjust the power rate from 500W-5000W.
3). When pressing
After stopping working, the fan will cool down the induction cooker for one minute, and then will
be off.
4). After pressing
, the induction cooker will Shut off automatically if there is no any operation
within 2 hours.
5). After the pressing the Lock button, the lock indicator will light up. During this time, the induction
cooker will not respond when any other button is pressed except for
To select another function or to close the unit, please press the lock button again for 2-3
seconds, until it makes a "beep" sound. Then every button will start work normally.
IV. Cleaning
1). Unplug and wait until the cooker is cooled down completely.
Clean the cooker after using each time.
2). If the pots/pans are used without being cleaned, discoloration or stains may occur.
3). Do not use gas, thinner, scrubbing brush or polishing powder to clean the induction cooker.
4). Wipe using dish washing agent and damp cloth.
5). Use a vacuum cleaner to suck out dirt from the air intake and exhaust vent.
6). Never run water over the machine (water getting inside may cause malfunction).
during the working State, the induction cooker will stop working immediately.
- 5 -
button.
