Eldom mill MK160 Manual De Instrucciones página 9

GENERAL INFORMATION
1
Bean hopper cover
2 Bean hopper
3
Coffee grinding thickness adjustment knob
4 Microswitch 1
5 Microswitch 2
6
Coffee grinding amount adjustment knob
7 Indicator light
8
Power switch
9 Housing
10
Ground coffee hopper cover
11
Ground coffee hopper
TECHNICAL DATA
Power: 140 W
Supply voltage: 220-240V ~ 50Hz
Volume: 100 g
INTENDED
The burr grinder MK160 is intended for grinding coffee beans. The grinding mechanism allows the
user to adjust тхэ fineness of the grind. You can enjoy aromatic coffee grind suitable both for espresso
machines and as Turkish coffee.
USE
Before using the machine for the first time, please carefully read this manual. After unboxing the
device, make sure it has not been damaged while transported. If in doubt, please refrain from using
the device until you consult the service centre.
NOTE:
Before using the device for the first time, thoroughly clean and dry any parts that come into
contact with the coffee.
Before each use, check the hoppers (2, 11) for any undesirable objects or contaminants.
• Make sure that the device is disconnected from the power supply and switched off.
• Place the device on a flat and stable surface.
• Remove the cover (1) and pour the beans into the hopper (2) – do not exceed the MAX level marked
on the hopper (2).
• Replace the cover (1) on the hopper (2) so that the microswitch (4) is pressed.
• Then insert the hopper (11) with the cover (10) in place into the body (9) so that the microswitch
(5) is pressed.
• Set the grinding thickness using the knob (3).
• Set the amount of ground coffee using the knob (6). You can set the number of cups from 2 to 12.
• Connect the appliance to a main supply with the parameters specified in the manual.
• Press the power switch (8) to grind the coffee. When grinding the coffee, hold the cover (1) with
your hand.
• Operation is indicated by the indicator light (7).
• The device will continue to operate until the amount of coffee specified using the knob (6) has
been ground. Bean hopper. The coffee grinder can be stopped at any time by pressing the power
switch (8).
• After grinding the coffee, wait until the quern stops, slide out the hopper (11) and open the cover
(10).
INSTRUCTION MANUAL
ELECTRICAL BURR GRINDER MK160
1
2
3
4
EN
5
6
7
10
8
9
11
EN 9