Livestrong LS10.0T Manual Del Propietário página 21

DOWNLOADING A NEW PROGRAM TO YOUR TREADMILL
1) Remove the USB protective cover and insert the USB stick.
2) Select "DOWNLOAD PROgRAM" using any + / – on the PROgRAMMINg BUTTON. Press ENTER to confirm.
3) Select the desired program using any + / – on the PROgRAMMINg BUTTON. Press ENTER to confirm.
4) Select memory slot 1 - 4 to save the desired program to. Press ENTER to confirm.
NOTE: If memory slot is full with a previously downloaded program, it will be overwritten with the new program.
Previous programs are available for download again from http://www.livestrong.com/equipment
NOTE: The transfer may take up to 5 seconds to complete. Do not remove the USB stick while info is downloading.
5) After the console confirms "DOWNLOAD COMPLETE, " remove USB stick and replace USB protective cover.
DOWNLOADING A SOfTWARE UPDATE fROM LIVESTRONG.COM
1) Insert USB stick into an available USB port in your computer.
2) Open your computer's internet browser and go to http://www.livestrong.com/equipment
to download software updates for your console.
UPDATE TREADMILL SOfTWARE
NOTE: Performing a software update will delete all previously saved information. Please save your workouts to your
USB before starting the software update.
1) Turn the power switch to the OFF position (Power switch is located next to the power cord).
2) Remove the USB protective cover, insert the USB stick and safety key.
3) Turn the power switch back to the ON position.
4) Select "SOFTWARE UPDATE" using any + / – on the PROgRAMMINg BUTTON. Press ENTER to confirm.
5) Remove the safety key. Press ENTER to confirm.
NOTE: The transfer may take up to 5 seconds to complete. Do not remove the USB stick while info is downloading.
6) After the console confirms "UPDATE COMPLETE, " press ENTER. It is now safe to remove the USB stick and
replace the USB protective cover.
21