SANUS VuePoint F55b Manual De Instrucciones página 6

1 Select TV Hardware and Mount TV Brackets
1-1 Select the hardware diameter and length
A
1-2 Attach brackets to a TV with a fl at back
A
[03]
6
Your TV type will help you determine which hardware
configuration to use. Match your type of TV to the suggested
hardware configuration on the next page.
A. Installation option without spacers (TVs with flat backs).
B. Installation option using spacers (TVs with irregular backs).
Hand thread screws into the threaded inserts on the back of
your TV to determine the correct screw diameter
M8).
CAUTION:
damage! Verify that there are adequate threads to secure the
brackets to the monitor. If you encounter resistance, stop
immediately and contact customer service. Use the shortest
screw and spacer combination to accommodate your needs.
Using hardware that is too long may damage your TV.
B
In step 1-1, if you selected the:
M4 x 12mm bolt [07] use the M4 washer [14].
M6 x 12mm bolt [09] use the M6/M8 washer [15].
M6 x 20mm bolt [10] use the M6/M8 washer [15].
M8 x 16mm bolt [12] use the M6/M8 washer [15].
Confirm that the brackets are level on the back of the TV.
If you require additional space for cables, recesses, or protrusions,
[02]
choose one of the following configurations.
M4/M6/M8
Avoid potential personal injuries and property
[02], [03]
[14], [15]
[07], [09], [10], [12]
6902-002031 <00>
(M4, M6, or