Turn the appliance on, by using the
–
on/off button.
The speed of the appliance can
–
be regulated by using the speed
button (B3). This function is very
useful, as it makes it possible to
adapt the power of the appliance
to the type of work that needs to
be done.
TIMER FUNCTION
The appliance's operating time can
–
be controlled.
To program the operating time
–
simply select it using the (B2)
button.
LIGHT CONTROL BUTTON
Press the light button (B4) and the
–
light ring will turn on in a different
color between blue, cyan, green,
yellow, orange, red, purple.
If you want to hold the color light,
–
press again the light button. If you
press again, the light will turn off.
FILTER CHANGE
When the filter life expires (about
–
2200hr), the filter replacement
indicator (which is the same as the
light circle (C)) will turn on in red
color.
Follow the instructions of Fig.1 to
–
replace the filter.
After changing the filter, hold the
–
on/off button for 7 seconds to
reset.
ONCE YOU HAVE FINISHED USING
THE APPLIANCE
Turn the appliance off, using the
–
on/off button.
Unplug the appliance from the
–
mains.
Cleaning
Disconnect the appliance from the
–
mains and allow it to cool before
undertaking any cleaning task.
Clean the electrical equipment and
–
the mains connection with a damp
cloth and dry. DO NOT IMMERSE IN
WATER OR ANY OTHER LIQUID.
Clean the equipment with a damp
–
cloth with a few drops of washing-
up liquid and then dry.
Do not use solvents, or products
–
with an acid or base pH such as
bleach, or abrasive products, for
cleaning the appliance.
Do not let water or any other liquid
–
get into the air vents to avoid
damage to the inner parts of
the appliance.
Never submerge the appliance in
–
water or any other liquid or place it
under running water.
Do not wash the filter.
–
Do not use a vacuum cleaner to
–
clean the filter.
Sterilize the filter under sunlight
–
regulary.
If the appliance is not in good
–
condition of cleanliness, its surface
may degrade and inexorably affect
the duration of the appliance's
EN