Kunft KCHS3125 IX Manual De Instrucciones página 11

3) Insert the anchors into the holes.
4) Insert the screws into the anchors and tighten them.
5) Put up the cooker hood onto the fixed screws (See Pic 3).
6) Insert the safety screws into the rest anchors and tighten them to
fix the body to the wall (See Pic 4).
7) Put the one-way valve onto the cooker hood.
Method B (See Pic 5):
1) Drill 4 holes with 6 mm at the bottom of the hanging cupboard
2) Put the one-way valve on the air outlet of the cooker hood, then
install the cooker hood on the bottom of the cupboard, and tighten
the cooker hood with the 4 screws included.
3) Install the adjusted board on the bottom of the hood in order to
close the gap between the back of the hood and the cupboard.
Note: There are 2 methods for ventilation, "horizontal ventilation" and
"vertical ventilation". Please pay attention to the ventilation method
when installing.
Horizontal ventilation (See Pic 6A): Please use the cover to seal the
outlet on the top, then the air can be vented from the back.
Vertical ventilation (See Pic 6B): Please use the cover to seal the
outlet on the back, then the air can be vented from the top.
2.1.2. air Ventilation Settings
Outdoor air ventilation: Turn the adjuster to outdoor position (Pic 7A),
install the outlet, turn on the cooker hood, then the air will be vented
from the outside outlet.
Indoor air ventilation: Turn the adjuster to indoor position (Pic 7B),
install the outlet cover, turn on the cooker hood, then the air can be
vented from the inside outlet.
Exaustor-KCHS3125-IX-Manual-1.indd 11
visor cooker hood
Pic 5
Pic 6
11
KCHS3125 IX
EN
17/06/20 15:15