Safety Precautions - Codonics Horizon SF Manual Del Usuario

Safety Precautions

Never connect this imager to any outlet or power supply that has a voltage or frequency
•
different than that specified on the rear of the imager.
When servicing the imager, always power it off using the (power) key at the control panel, then
•
turn the rocker switch in the back to the 0 (off) position, then unplug the imager.
Damage to the power cord may cause fire or shock hazard. When unplugging the power cord,
•
hold it by the plug only and remove the plug carefully.
If the power cord needs to be replaced, replace it only with another Codonics power cord
•
manufactured specifically for your imager's power configuration.