Horizon Global 76434 Instrucciones De Instalación página 4

1. Remove taillights - Open tailgate. Remove plastic cover near taillight, using a T15 star driver, remove (2) screws holding cover to taillight housing, both sides. Remove
taillight by gently pulling rearward. Disconnect the wiring and set taillight aside, both sides
2. Remove fascia - a.) Located on the underside of rear bumper fascia there will be plastic push-pin rivets that will need to be removed. Using a flat head screw driver
remove plastic push-pin rivets. Both sides.
©2021 Horizon Global™ Corp - Printed in Mexico Sheet 4 of 27 76434NP 1-11-21 Rev. A