Snooze Function - BALDR B0340WST2H2R-V7 Manual Del Usuario

SNOOZE FUNCTION

1. When the alarm is ringing, press any other button except top
button to stop the alarm. And the alarm will restart next day.
2. Or when alarm is ringing, press the top button to activate snooze
function. The alarm will ring again in 5 minutes snooze interval.
And the " " symbol will be flashing on screen to indicate the
snooze mode. Press any other button except top button to exit
the snooze mode. And the alarm will restart next day.
3. When alarm rings, the ascending "Bibi" alarm sound will last for
2 minutes if no operation.
OPERATION GUIDELINES
MAX AND MIN RECORD
1.
Press " MEM/▼" button to check outdoor and indoor max/min
temperature and humidity.
2.
The checking order is : Max Record→Min Record→Exit. The
value will display for 3 seconds.
3.
Press and hold the " MEM/▼" button to clear the max and min
record.
4. Normally, the Max and Min record will update every 24 hours at
0:00.
5. If no operation for 3 seconds, it will automatically exit .
TEMPERATURE
1. After power on ,the indoor temperature will display automatically,
it will update reading each 30 seconds and start to receive
outdoor signal which lasts for max 3 minutes.
2. Indoor temperature display range:-10℃~ 50.0℃(14℉~ 122℉);
for temperature lower than -10℃,the reading will be :"LL.L"; for
temperature higher than +50℃,the reading will be :"HH.H".
3. Outdoor temperature display range :-40℃~60℃(-40℉~140℉);
for temperature lower than -40℃,the reading will be :"LL.L"; for
temperature higher than +60℃,the reading will be :"HH.H".
10