SPC GLEE 7 Manual De Usuario página 31

CARD AND USB
DEVICE INSTALLATION
EN
Insert the microSD memory card (up to 32GB) in the
microSD card slot (7) with the contacts of the card inside,
and looking at the back. Press until it is fully contained
inside the device and you hear a click. To extract the card,
press it slightly inwards until you hear a click. The card will
pop out of the slot, then you can remove it.
To connect a USB memory or device, connect one end of
the USB-OTG cable supplied with the device and the other
end into the USB device that you want to connect.
NOTE: The card and USB memory (not included) must be formatted
in FAT32. Every time you want to insert or remove a card or USB
device you must switch off the tablet before, if you do not do it, the
tablet will not recognize it.
31