Hiyasu ASE 18UB Manual De Funcionamiento página 68

06Manual 2Hiyasu Eng 7/4/06
Auto run, Fan operation
(1) Unit start
Press ON/OFF button, unit starts.
Previous operation status appears on display.
(Not Timer setting)
Power indicator on indoor unit lights up.
(2) Select operation mode
Press MODE button. For each press, operation mode changes as follows:
Unit will run in selected mode.
Stop display at "
(3) FAN
Press FAN button. For each press, fan speed changes
as follows:
Unit will run at selected fan speed.
Note:AUTO is not available in FAN mode.
(4) Unit stop
Press ON/OFF button.
Only time remains on LCD.
All indicators on indoor unit go out.
Vertical flap closed automatically.
Hints
Remote controller can memorize settings in each operation mode. To run it
next time just
select the operation mode and it will start with the previous setting.
No reselecting is needed.(TIMER ON/OFF needs reselecting)
Cautions:
EOn cooling only unit, heating mode is not available, After replacing
Note:
batteries, press ON/OFF, and display
becomes as follows:
Operation mode: AUTO, Temp. No
Timer mode: No, Fan speed :AUTO
Note: The above information is the explanation of the displayed informa-
tion therefore varies with those displayed in actual operation.
66
09:22 Página 66
OPERATION
" AUTO or " " FAN.