Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Installation
Step 8:
Install the lift rod
• Slide the joint nut and screw over the pivot rod.
• Insert the pop-up rod (L) and pivot rod (G) through the hole in the back of the faucet.
• Slide the lift rod (K) through the opening in the joint nut (I) and tighten.
• Tighten the joint screw (J) using a screwdriver.
NOTICE
To adjust the stopper, loosen the screw in the joint nut and slide the pop-up
body and lift the rod up or down inside the joint nut. Tighten the joint nut screw
and check the operation of the stopper.
Step 9:
Check for leaks
Faucet
Pop-up rod
Lift rod
Joint nut
Pivot
rod
Pivot nut
11
Tabla de contenido
