Features; Unpacking Your Wine Cellar; Setting Up Your Wine Cellar; Select The Right Location - Cuisinart CWC-1800CU Manual Del Usuario

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

FEATURES

1. Touchscreen Controls
2. Slide-Out, Wood-Trimmed Shelves
3. Tempered Glass Door
4. Leveling Legs
1
3
1
2
4
UNPACKING YOUR
WINE CELLAR
Unpack your cellar and carefully check the
interior and exterior. Should any damage be
evident, do not plug the appliance in. Contact
the store from which you purchased it.
This unit must always be kept upright – before,
during and after unpacking.
SETTING UP YOUR
WINE CELLAR
ALWAYS REMOVE ALL BOTTLES BEFORE
MOVING THE WINE CELLAR

Select the Right Location

NOTE: The cellar is designed for
freestanding operation. It is not made to
be recessed or built-in (fully recessed).
The cellar must be positioned on a flat
surface that is strong enough to support it
when fully loaded.
Choose a location where there is no risk of
extreme temperatures, either hot or cold,
such as a garage that is not properly
insulated or heated.
Do not place the unit in a moist area or in an
area where it is exposed to direct sunlight.
Do not place the unit next to any appliance
that emits large amounts of heat, such as a
dishwasher, microwave, toaster oven, oven or
barbecue, etc., or near radiators, baseboard
heaters or other heat sources.
NOTE: Allow enough space in the front of
the unit to open the door 120°.

Proper Air Circulation

To assure that your wine cellar works at the
maximum efficiency for which it was
designed, you should install it in a location
where there is proper air circulation and
electrical connections.
The cellar is designed to be freestanding and
should not be recessed or built-in. Allow 2
inches of space on both sides and back of
the wine cellar to allow proper ventilation.
4

Capítulos

Tabla de contenido
loading

Tabla de contenido