introduction
Please read these instructions carefully before attempting to fit your safety gate. Please
check that all parts listed have been supplied.
(See fig. 1)
2 x Wooden Gate Sections
A) 4 x Connecting Bolts
B) 1 x Upper Catch
C) 1 x Upper Bar + Nut
D) 1 x Upper Hinge Bar
E) 1 x Upper Hinge
fig. 1
B
C
where to fix your gate
F
G
J
FLOOR
Please take a few minutes to read your instructions fully to ensure the full safety benefit
of your gate. If any parts are missing or damaged do not attempt to fit or use your gate.
Please call our approved supplier Lindam's customer careline on 0871 702 1000 (Monday -
Friday 10am - 4pm UK only) to obtain replacements. Non-UK residents please contact your
retailer. Only use parts supplied by Lindam with your gate.
1
F)
1 x Lower Catch
G) 1 x Lower Bar + Nut
H) 1 x Lower Hinge Bar
I)
1 x Lower Hinge
J)
1 x Drilling Template
K)
1 x Spanner
L)
8 x Wood Screws + Plugs
A
E
D
H
I
K
L
where to fix your gate
(See fig. 2)
Check the width of the opening where you intend to fit your mothercare gate. The smallest
opening this gate is suitable for is 62cm and the largest opening is 106cm. IMPORTANT: Do
not attempt to use this gate in openings larger than 106cm.
fig. 2
(See fig. 3)
WARNING: The position of your safety gate in relation to the stairs is very important for your
child's safety. Your gate may be better positioned across your landing to prevent access to
the stairs completely. If you do require your gate to be positioned at the top of the stairs to
prevent your child descending, the gate must be fitted on the very top stair. If you intend to
use the gate at the bottom of the stairs then it must be placed on the lowest stair, towards
the front of the step, away from the 2nd step.
fig. 3
(See fig. 4)
Your correctly fitted gate will look like this -
fig. 4
62cm MIN
106cm MAX
2
