Tabla de contenido
Maintenance responsibilities table
Maintenance of a medical device is wholly the responsibility of the owner of that device. Failure
to maintain a device in accordance with the instructions may invalidate the device's warranty.
Furthermore, failure to maintain a device may compromise the clinical condition or safety of
EN
users and/or their caregivers.
Frequency
1st Day
Daily
Weekly
Monthly
Annually
Warewashing machine
This product can be washed for 15-20 minutes at 60°, using a mild detergent or disinfection
without chlorine, in a machine designed for medical devices. Equipment shall be disassembled
as necessary to allow access of the detergent solution to all parts. Equipment components
and utensils shall be scrapped or rough cleaned to remove food particle accumulation. Please
allow the product to dry before reuse.
Fabrics and covers
Can be machine washed at 60°. (R82 recommend washing at 40°)
Accessories and spare parts
The products from R82 can be supplied with a variety of accessories which comply with the
needs of the individual user. Spare parts can be ordered on request. Find the specific accesso-
ries on our website or contact your local dealer for further information.
Service interval
A detailed inspection of the product must be made every 12 months (every 6 months for heavy
users) and every time the product is reissued for use. The inspection should be carried out by a
technically competent person who has been trained in the use of the product.
The lifetime of this product in normal use is 5 years if all maintenance and servicing is carried
out in accordance with the manufacturer's instructions and demonstrably recorded.
ENGLISH
Description
Read the instructions for use (IFU) carefully before use and store
them in a safe place for future reference
Store the enclosed tools on/at the product
Use a dry cloth to clean the product
Visual inspection. Repair or replace any damaged or worn-out parts
Ensure that all fasteners are in place and fitted correctly
Check all fittings and buckles for signs of worn out parts
Be aware of any max mark indications before adjustment
Check that all castors are moving freely and that all wheel locks/
brakes are easily activated
Wipe off any residue and dirt from the product using a cloth with
warm water and a mild detergent or disinfection without chlorine
and dry before use
All nuts and bolt on this product must be checked and tightened
to avoid unnecessary failures
Oil the swing-away parts. We recommend you use a professional
lubricant system, e.g. Veidec Dry Lube
Inspect the frame for cracks or signs for worn-out parts and carry
out annual service. Never use a product which appears to be sub-
standard or faulty
30
Tabla de contenido
