Lan Settings - aqprox appR300V2 Guia Del Usuario


Gateway
In this mode, the device is supposed to connect to internet via
ADSL/Cable Modem.

Bridge
In this mode, all Ethernet ports and wireless interface are bridged
together and NAT function is disabled. All the WAN related function
and firewall are not supported.

Wireless ISP
In this mode, all Ethernet ports are bridged together and the
wireless client will connect to ISP access point.
Click the Apply Changes button to Change your Router Mode.

5.4 LAN Settings

Please click „TCP/IP
SettingsLan Interfaces‰
located at the web
management interface, the
following message will be
displayed on your web browser:
IP Address:
Subnet Mask:
Enter the IP address of your Router or reset it in
dotted-decimal notation Wireless-N Router (factory
default: 192.168.0.1).
An address code that determines the size of the
network. Normally use 255.255.255.0 as the
subnet mask.