Idiomas disponibles
Idiomas disponibles
ENGLISH
Problem
If the Baby Unit
has lost its link
with the Parent
Unit
8. TECHNICAL SPECIFICATIONS
Frequency
Operating Range
Nº of configurable channels
Power
9. INFORMATION ON DISPOSAL OF THE PRODUCT
· Remember to dispose of the product in an environmentally responsible way, removing the
battery first.
· Do not mix products bearing the symbol of a crossed out bin with normal household waste.
· For proper collection and processing of these products, take them to the collection points
designated by local authorities. You can also contact the store where you purchased the product.
Hereby, Miniland S.A. declares that this 89166 digital camera 2.4" is in compliance
with the essential requirements and other relevant provisions of Directive 1999/5/EC.
Possible Cause
The camera and monitor may be
too far apart
The link between both units has
been lost momentarily
The link between both units has
been lost
2.4GHz FHSS
250m (straight line and open space)
4
Input: 100-240 VCA 50/60Hz
Output: 5V 800mA
Solution
Move the monitor closer to the
camera
Reset the units by disconnecting
them from the electrical power.
Wait about 15 seconds before
reconnecting. Allow up to one
minute for the Baby Unit and the
Parent Unit to synchronize.
Pair the camera and monitor again.
See 5.2.6.
18
