VOLTOMAT HEATING BH-117327.1 Manual De Instrucciones página 105

BH-117327.1&BH-117327.2
INSTALLATION
WALL MOUNTED
FIX THE PRODUCT AS DESCRIBED BELOW
Please install the two feet before wall mounting. Directly press the two feet into position like above picture.
1) There must be sufficient free space around the mounted heater.
2) Drill two holes in the wall above the floor (see sketch: screw positions A & B). The diameter must
correspond to the used dowels. Insert plastic dowels into the holes.
3) Screw two screws into the dowels (position A & B in the sketch) so that they protrude 10mm, and hang
the machine onto the screws.
- 104 -
GB