Maintenance; Parts Breakdown - Marshalltown SHARPSHOOTER 1 Manual De Instrucciones

MAINTENANCE

It is important to keep the gun and hopper clean. For best results, separate the gun and hopper and flush
each with clean water. The front and rear bushings (12, 22) are permanently lubricated; re-oiling is normally not
necessary.
REPLACEMENT PARTS
Refer to the illustration for part numbers and proper assembly. Replacement parts may be ordered individually,
or are available in the MARSHALLTOWN No. RK696 Repair Kit. The RK696 Repair Kit contains the orifice plate,
knurled nut, center knob, rubber boot, trigger, transfer bar, mixture nozzle, and E-clip retainer.
When re-assembling the gun, use a silicone sealant* between the housing halves to prevent the spray material
from leaking to the trigger mechanism.
* Not included, purchase separately.
32
Exploded View/Diagram
693 (EDI No. 16356) SharpShooter Drywall Hopper Gun — Parts List
4 of 20
WS1273
104 S. 8th Ave. Marshalltown, IA Phone 800-888-0127 / 641-753-0127 • Fax 800-477-6341 / 641-753-6341 www.MARSHALLTOWN.com